Modem Configuration - 3Com 3C13636 Configuration Manual

3Com Router 3000 Ethernet Family
Configuration Guide
execution will be terminated. Regardless of where the ABORT receive-string is
placed, it will take effect in the whole script execution process.
Escape characters can be inserted in a script for the purpose of better controlling
the script and increasing its flexibility. In addition, all the escape characters also
play the role of delimiters in the string as well.
Table 3-1 Script keywords
Keyword
ABORT
receive-string
TIMEOUT seconds
In which, seconds defaults to 180 and is in the range of 0 to 180.
Table 3-2 Script escape characters
Escape character
\c
\d
\n
\r
\s
\t
\\
\T

3.2 Modem Configuration

Modem Configuration includes to:
Configure the modem dial-in and dial-out permission
Configure modem through the AT commands
Configure a modem script
The string following ABORT will be compared with the strings
sent from a modems or remote DTE device for a match. The
match mode is full match. Multiple ABORT entries can be
configured for a script, and all of them take effect in the whole
script execution period.
The digit following TIMEOUT is used to set the timeout
interval that the device waits for receiving strings. If no
expected strings are received within the interval, the
execution of the script will be failed. Once being set, the
setting will be valid till a new TIMEOUT is set.
It means that only the specified string can be sent and the
character "Enter" will not be sent. The character of "\c" must be
at the end of the sending strings. Otherwise, it is invalid at
other location.
Represents pausing 2 seconds.
Represents the character "new line".
Represents the character "Enter".
Represents the character "Space".
Represents the character "Tab".
Represents the character "\".
Represents telephone number.
3Com Corporation
3-3
Chapter 3 Modem Configuration
Description
Description