3Com 3C13636 Configuration Manual page 804

3Com Router 3000 Ethernet Family
Configuration Guide
[RTE] interface loopback10
[RTE-LoopBack10] ip address 10.1.1.1 255.255.255.255
[RTE-LoopBack10] pim sm
[RTE-LoopBack10] quit
# Configure the IP address of interface Ethernet 0/0/0 and enable PIM-SM.
[RTE] interface ethernet 0/0/0
[RTE-Ethernet0/0/0] ip address 10.26.2.3 255.255.255.0
[RTE-Ethernet0/0/0] pim sm
[RTE-Ethernet0/0/0] undo shutdown
[RTE-Ethernet0/0/0] quit
# Configure the IP address of interface Serial 1/0/0 and enable PIM-SM.
[RTE] interface serial 1/0/0
[RTE-Serial1/0/0] ip address 10.26.3.1 255.255.255.0
[RTE-Serial1/0/0] pim sm
[RTE-Serial1/0/0] undo shutdown
[RTE-Serial1/0/0] quit
# Configure OSPF.
[RTE] ospf
[RTE-ospf-1] area 0
[RTE-ospf-1-area-0.0.0.0] network 10.26.2.0 0.255.255.255
[RTE-ospf-1-area-0.0.0.0] network 10.1.1.1 0.0.0.0
[RTE-ospf-1-area-0.0.0.0] network 10.26.1.2 0.0.0.0
[RTE-ospf-1-area-0.0.0.0] quit
[RTE-ospf-1] quit
# Configure the IBGP peer RTA.
[RTE] bgp 100
[RTE-bgp] undo synchronization
[RTE-bgp] group rta internal
[RTE-bgp] peer 10.25.1.1 group rta
[RTE-bgp] peer rta connect-interface loopback0
[RTE-bgp] peer rta next-hop-local
[RTE-bgp] ipv4-family multicast
[RTE-bgp-af-mul] peer 10.25.1.1 group rta
[RTE-bgp-af-mul] peer rta enable
[RTE-bgp-af-mul] peer rta next-hop-local
[RTE-bgp-af-mul] quit
# Configure the IBGP peer RTF.
[RTE-bgp] group rtf internal
[RTE-bgp] peer 10.26.1.2 group rtf
[RTE-bgp] peer rtf connect-interface loopback0
3Com Corporation
5-21
Chapter 5 MSDP Configuration