3Com 3C13636 Configuration Manual page 1282

3Com Router 3000 Ethernet Family
Configuration Guide
[Client1-Ethernet0/0/1] quit
# Configure the DVPN class.
[Client1] dvpn class testserver
[Client1-dvpn-class-testserver] public-ip 201.1.1.1
[Client1-dvpn-class-testserver] quit
# Configure interface Tunnel0.
[Client1] interface tunnel 0
[Client1-Tunnel0] ip address 10.0.0.2 255.255.255.0
[Client1-Tunnel0] tunnel-protocol udp dvpn
[Client1-Tunnel0] source Ethernet0/0/0
[Client1-Tunnel0] dvpn interface-type client
[Client1-Tunnel0] dvpn server testserver
[Client1-Tunnel0] dvpn vpn-id 1
[Client1-Tunnel0] quit
# Configure static routes.
[Client1] ip route-static 10.0.1.0
[Client1] ip route-static 10.1.3.0
4) Configure Client2
# Enable DVPN.
<Client2> system-view
[Client2] dvpn service
# Configure interface Ethernet0/0/0.
[Client2] interface Ethernet0/0/0
[Client2-Ethernet0/0/0] ip address 201.1.1.3 255.255.255.0
[Client2-Ethernet0/0/0] quit
# Configure interface Ethernet0/0/1.
[Client2] interface Ethernet0/0/1
[Client2-Ethernet0/0/1] ip address 10.1.3.1 255.255.255.0
[Client2-Ethernet0/0/1] quit
# Configure the DVPN class.
[Client2] dvpn class testserver
[Client2-dvpn-class-testserver] public-ip 201.1.1.1
[Client2-dvpn-class-testserver] quit
# Configure interface Tunnel0.
[Client2] interface tunnel 0
[Client2-Tunnel0] ip address 10.0.0.3 255.255.255.0
[Client2-Tunnel0] tunnel-protocol udp dvpn
[Client2-Tunnel0] source Ethernet0/0/0
255.255.255.0
255.255.255.0
enable
3Com Corporation
4-28
Chapter 4 DVPN
10.0.0.1
10.0.0.3