Protocol Packet Priority Configuration Example - 3Com 3C13636 Configuration Manual

3Com Router 3000 Ethernet Family
Configuration Guide
Restore the default
Caution:
Currently, you can only change priorities of six types of protocol packets: OSPF, Telnet,
SNMP, ICMP, BGP, and LDP. In addition, this command is only valid for protocol
packets generated by this host.

5.3 Protocol Packet Priority Configuration Example

I. Network requirements
Change the IP precedence of OSPF packets to 3.
II. Configuration procedure
# Set the IP precedence of OSPF packets to 3.
<3Com> system-view
[3Com] protocol-priority protocol-type ospf ip-precedence 3
# Display priorities of protocol packets.
[3Com] display protocol-priority
Protocol: ospf
IP-Precedence: flash(3)
Operation
3Com Corporation
5-4
Chapter 5 Protocol Packet Priority Configuration
Command
undo protocol-priority protocol-type
protocol-type