3Com 3C13636 Configuration Manual page 1017

3Com Router 3000 Ethernet Family
Configuration Guide
Note:
If you use a radius-scheme or hwtacacs-scheme to authenticate users, you must
appropriately configure the RADIUS or TACACS server (whether it can be configured
and how are decided by the server); the local configuration in this case has no effect.
I. Creating a local user
A local user is a group of users set on NAS (a router). The username is the unique
identifier of a user. A user requesting network service can pass local authentication as
long as its information has been added to the local user database of NAS.
Perform the following configuration in system view
Table 2-11 Create/delete a local user and the relevant properties
Add a local user.
Delete a local user by specifying its type.
By default, there is no local user in the system.
II. Setting attributes of a local user
The attributes of a local user include user password display mode, user password, user
state, and the type of service that is authorized to the user.
Perform the following configuration in system view.
Table 2-12 Set the password display mode for local users
Set the password display
mode for all local users.
Cancel the password display
mode for local users.
Where, auto means that the password display mode will be the one specified by the
user at the time of configuring password (see the password command in the following
table for reference), and cipher-force means that the password display mode of all the
accessing users must be in cipher text.
Perform the following configurations in local user view.
Operation
Operation
3Com Corporation
Chapter 2 AAA and RADIUS/HWTACACS Protocol
local-user user-name
undo local-user { user-name | all }
Command
local-user
{ cipher-force | auto }
undo local-user password-display-mode
2-16
Configuration
Command
password-display-mode