3Com 3C13636 Configuration Manual page 823

3Com Router 3000 Ethernet Family
Configuration Guide
[RouterD-Serial1/1/0] quit
[RouterD] ospf
[RouterD-ospf-1] area 0
[RouterD-ospf-1-area-0.0.0.0] network 194.1.1.0 0.0.0.255
[RouterD-ospf-1-area-0.0.0.0] network 195.1.1.0 0.0.0.255
[RouterD-ospf-1-area-0.0.0.0] network 4.0.0.0 0.0.0.255
[RouterD-ospf-1-area-0.0.0.0] quit
[RouterD-ospf-1] quit
[RouterD] bgp 200
[RouterD-bgp] undo synchronization
[RouterD-bgp] group d1 internal
[RouterD-bgp] peer 194.1.1.2 group d1
[RouterD-bgp] peer 194.1.1.2 group d1
[RouterD-bgp] ipv4-family multicast
[RouterD-bgp-af-mul] peer d1 enable
[RouterD-bgp-af-mul] peer 195.1.1.2 group d1
[RouterD-bgp-af-mul] peer 194.1.1.2 group d1
To make the configuration effective, the reset bgp all command on all MBGP
neighbors.
Chapter 6 MBGP Multicast Extension Configuration
3Com Corporation
6-17