Dialing Directly With The Script; Troubleshooting - 3Com 3C13636 Configuration Manual

Router 3000 ethernet family

Hide thumbs Also See for 3C13636:

Table of Contents

3Com Router 3000 Ethernet Family

Configuration Guide

[3Com-ui-tty1] script trigger init init

3.4.3 Dialing Directly with the Script

I. Configuration requirement

Configure a modem script to dial directly.

II. Configuration procedure

[3Com] script-string dial "" AT OK ATDT8810058 CONNECT

# Execute the corresponding script in interface view, supposing the modem is

connected to the interface tty1. Using the display user-interface tty 1 command to

see the absolute index be 1.

<3Com> start-script dial 1

Fault: Modem is in abnormal status (such as the dial tone or busy tone keeps humming

for a long time).

Troubleshooting:

Execute the commands shutdown and undo shutdown on the router physical

interface connected to the modem to check whether the modem has been

restored to normal status.

If the modem is still in abnormal status, you can re-power the modem.

3Com Corporation

Chapter 3 Modem Configuration

Table of Contents

3c13636-us - router 3036 3000 series