Configuring Time Range; Deleting An Acl; Creating/Deleting A Time Range; Displaying And Debugging Acl - 3Com 3C13636 Configuration Manual

3Com Router 3000 Ethernet Family
Configuration Guide
Operation
Configure/delete
ACL
MAC-based
view.

5.2.5 Deleting an ACL

Perform the following configuration in system view.
Table 5-8 Delete an ACL
Operation
Delete ACL

5.3 Configuring Time Range

Time range configuration includes:
Create a time range

5.3.1 Creating/Deleting a Time Range

The configuration task is used to create a time range or many time ranges with the
same name.
Perform the following configuration in system view.
Table 5-9 Configure time range
Operation
Create a time
range
Delete a time
range.

5.4 Displaying and Debugging ACL

After the above configuration, execute the display command in all views to display the
running of the ACL configuration, and to verify the effect of the configuration. Execute
the reset command in user view to rest ACL counters.
rule [ rule-id ] { deny | permit } [ type type-code type-mask
an
| lsap lsap-code lsap-mask ] ] [ source-mac sour-addr
rule in
sour-wildcard ] [ dest-mac dest-addr dest-mask ]
ACL
undo rule rule-id
undo acl { number acl-number | all }
time-range time-name [ start-time to end-time ] [ days ] [ from
time1 date1 ] [ to time2 date2 ]
undo time-range time-name [ start-time to end-time ] [ days ]
[ from time1 date1 ] [ to time2 date2 ]
3Com Corporation
Command
Command
Command
5-16
Chapter 5 ACL Configuration