3Com 3C13636 Configuration Manual page 1068

3Com Router 3000 Ethernet Family
Configuration Guide
To do...
Configure the IP
address
interface
connected to the
CAMS server
Enable
authentication on
the interface
Exit to
view
Enter
scheme view
Set the
type to portal
Configure the IP
address
security
server
Display
configuration
information
statistics
portal
Note:
Enable portal authentication only after completing the portal+ authentication
configuration.
Neither authentication-free users nor devices with free IP addresses are to be
isolated.
You need to configure the security-policy-server command only when RADIUS,
portal, and security policy servers are not co-located.
For EAD, you may configure portal to operate in direct authentication mode or
re-DHCP authentication mode while the portal authentication mode must be set to
normal.
Use the command...
of the
portal upload-ip ip-address
portal
portal server-name
system
quit
RADIUS radius
radius-scheme-name
server
server-type portal
of security-policy-server
policy ip-address
display
statistics | auth-network
[
interface-type
interface-num ] | free-user |
free-ip
and
[
about
interface-num ] | server
[server-name ] | | server
statistics
statistics|
update-resource ]
3Com Corporation
Required
This
configured on
enabled
authentication.
Required
––
scheme
Required
Required
Optional
portal [ acm
auth-interface
| interface Execute the command in any
view.
interface-type
| tcp-cheap
4-7
Chapter 4 EAD Configuration
Remarks
command must
the interface
with portal
be