Show Captive-Portal Interface Client Status - NETGEAR GSM7228PS Cli Manual

Term Definition
Client MAC The MAC address of the authenticated client
address
Bytes Received The number of bytes received from the client
Bytes Transmitted The number of bytes transmitted to the client
Packets Received The number of packets received from the client
Packets The number of packets transmitted from the client
Transmitted
Example
(switch)#show captive-portal client 0102.0304.0506 statistics
Client MAC Address........................ 0002.bc00.1290
Bytes Received............................ 0
Bytes Transmitted......................... 0
Packets Received.......................... 0
Packets Transmitted....................... 0

show captive-portal interface client status

Use this command to display information about clients authenticated on all interfaces or a specific
interface
Format
show captive-portal interface [<unit/slot/port>] client status
Mode Privileged EXEC mode
Term Definition
Client Intf Interface on which the clients are authenticated.
Client Intf The interface description
Descripiton
MAC Address The MAC address of the authenticated user.
IP Address The IP address of the authenticated user.
If the interface is specified, the following terms are displayed.
Term Definition
CP ID The ID of the captive portal associated with the client
CP Name The name of the captive portal associated with the client
Protocol The protocol the client is using
Captive Portal Commands
Managed Switch CLI Manual, Release 8.0.3
v1.0, July 2010
12-21