Capability Opaque; Clear Ip Ospf; Clear Ip Ospf Configuration; Clear Ip Ospf Counters - NETGEAR GSM7228PS Cli Manual

capability opaque

Use this command to enable Opaque Capability on the Router. The information contained in
Opaque LSAs may be used directly by OSPF or indirectly by an application wishing to distribute
information throughout the OSPF domain. The 7000 series supports the storing and flooding of
Opaque LSAs of different scopes.
Default disabled
Format
capability opaque
Mode Router OSPF Config
no capability opaque
Use this command to disable opaque capability on the router.
Format
no capability opaque
Mode Router OSPF Config

clear ip ospf

Use this command to disable and re-enable OSPF.
Format
clear ip ospf
Mode Privileged EXEC

clear ip ospf configuration

Use this command to reset the OSPF configuration to factory defaults.
Format
clear ip ospf configuration
Mode Privileged EXEC

clear ip ospf counters

Use this command to reset global and interface statistics.
Routing Commands
Managed Switch CLI Manual, Release 8.0.3
v1.0, July 2010
4-51