Enable Password - NETGEAR GSM7228PS Cli Manual

enable password

This command prompts you to change the Privileged EXEC password. Passwords are a maximum
of 64 alphanumeric characters. The password is case sensitive. The option [encrypted] allows the
administrator to transfer the enable password between devices without having to know the
password. In this case, the <password> parameter must be exactly 128 hexadecimal characters..
Format
enable password <passwor> [encrypted]
Mode Privileged EXEC
logout
This command closes the current telnet connection or resets the current serial connection.
Note: Save configuration changes before logging out.
Format
logout
Modes • Privileged EXEC
• User EXEC
ping
Use this command to determine whether another computer is on the network. Ping provides a
synchronous response when initiated from the CLI and Web interfaces.
Default • The default count is 1.
• The default interval is 3 seconds.
• The default size is 0 bytes.
Format
ping <ipaddress|hostname> [count <count>] [interval <interval>] [size
<size>]
Modes • Privileged EXEC
• User EXEC
Utility Commands
Managed Switch CLI Manual, Release 8.0.3
v1.0, July 2010
9-29