Serviceability Packet Tracing Commands; Debug Arp; Debug Auto-Voip - NETGEAR GSM7228PS Cli Manual

Mode Global Config
Default Enabled

Serviceability Packet Tracing Commands

These commands improve the capability of network engineers to diagnose conditions affecting
their managed switch product.
Caution! The output of "debug" commands can be long and may adversely affect system
performance.

debug arp

Use this command to enable ARP debug protocol messages.
Default disabled
Format
debug arp
Mode Privileged EXEC
no debug arp
Use this command to disable ARP debug protocol messages.
Format
no debug arp
Mode Privileged EXEC

debug auto-voip

Use this command to enable Auto VOIP debug messages. Use the optional parameters to trace
H323, SCCP, or SIP packets respectively.
Default disabled
Format
debug auto-voip [H323|SCCP|SIP]
Mode Privileged EXEC
Utility Commands
Managed Switch CLI Manual, Release 8.0.3
v1.0, July 2010
9-63