Debug Ipv6 Pimdm Packet; Debug Ipv6 Pimsm Packet - NETGEAR GSM7228PS Cli Manual

Format
no debug ipv6 mld packet [receive|transmit]
Mode Privileged EXEC

debug ipv6 pimdm packet

Use this command to trace PIMDMv6 packet reception and transmission. receive traces only
received PIMDMv6 packets and transmit traces only transmitted PIMDMv6 packets. When
neither keyword is used in the command, then all PIMDMv6 packet traces are dumped. Vital
information such as source address, destination address, control packet type, packet length, and the
interface on which the packet is received or transmitted is displayed on the console.
Default disabled
Format
debug ipv6 pimdm packet [receive|transmit]
Mode Privileged EXEC
no debug ipv6 pimdm packet
Use this command to disable debug tracing of PIMDMv6 packet reception and transmission.

debug ipv6 pimsm packet

Use this command to trace PIMSMv6 packet reception and transmission. receive traces only
received PIMSMv6 packets and transmit traces only transmitted PIMSMv6 packets. When
neither keyword is used in the command, then all PIMSMv6 packet traces are dumped. Vital
information such as source address, destination address, control packet type, packet length, and the
interface on which the packet is received or transmitted is displayed on the console.
Default disabled
Format
debug ipv6 pimsm packet [receive|transmit]
Mode Privileged EXEC
no debug ipv6 pimsm packet
Use this command to disable debug tracing of PIMSMv6 packet reception and transmission.
Utility Commands
Managed Switch CLI Manual, Release 8.0.3
v1.0, July 2010
9-73