no vlan acceptframe
This command resets the frame acceptance mode for the interface to the default value.
Format
no vlan acceptframe
Mode
Interface Config
vlan ingressfilter
This command enables ingress filtering. If ingress filtering is disabled, frames received with
VLAN IDs that do not match the VLAN membership of the receiving interface are admitted and
forwarded to ports that are members of that VLAN.
Default
disabled
Format
vlan ingressfilter
Mode
Interface Config
no vlan ingressfilter
This command disables ingress filtering. If ingress filtering is disabled, frames received with
VLAN IDs that do not match the VLAN membership of the receiving interface are admitted and
forwarded to ports that are members of that VLAN.
Format
no vlan ingressfilter
Mode
Interface Config
vlan makestatic
This command changes a dynamically created VLAN (one that is created by GVRP registration) to
a static VLAN (one that is permanently configured and defined). The ID is a valid VLAN
identification number. VLAN range is 2-4093.
Format
vlan makestatic <2-4093>
Mode
VLAN Config
Switching Commands
Managed Switch CLI Manual, Release 8.0.3
v1.0, July 2010
3-33