Clear Ipv6 Ospf; Clear Ipv6 Ospf Configuration; Clear Ipv6 Ospf Counters; Clear Ipv6 Ospf Neighbor - NETGEAR GSM7228PS Cli Manual

Format
no auto-cost reference-bandwidth
Mode Router OSPFv3 Config

clear ipv6 ospf

Use this command to disable and re-enable OSPF.
Format
clear ipv6 ospf
Mode Privileged EXEC

clear ipv6 ospf configuration

Use this command to reset the OSPF configuration to factory defaults.
Format
clear ipv6 ospf configuration
Mode Privileged EXEC

clear ipv6 ospf counters

Use this command to reset global and interface statistics.
Format
clear ipv6 ospf counters
Mode Privileged EXEC

clear ipv6 ospf neighbor

Use this command to drop the adjacency with all OSPF neighbors. On each neighbor's interface,
send a one-way hello. Adjacencies may then be re-established. To drop all adjacencies with a
specific router ID, specify the neighbor's Router ID using the optional parameter [neighbor-id].
Format
clear ipv6 ospf neighbor [neighbor-id]
Mode Privileged EXEC
IPv6 Commands
Managed Switch CLI Manual, Release 8.0.3
v1.0, July 2010
7-46