Mark Cos - NETGEAR GSM7228PS Cli Manual

Note: The CLI mode is changed to Policy-Class-Map Config when this command is
successfully executed.
Format
class <classname>
Mode Policy-Map Config
no class
This command deletes the instance of a particular class and its defined treatment from the
specified policy. <classname> is the names of an existing DiffServ class.
Note: This command removes the reference to the class definition for the specified policy.
Format
no class <classname>
Mode Policy-Map Config

mark cos

This command marks all packets for the associated traffic stream with the specified class of
service value in the priority field of the 802.1p header (the only tag in a single tagged packet or the
first or outer 802.1Q tag of a double VLAN tagged packet). If the packet does not already contain
this header, one is inserted. The CoS value is an integer from 0 to 7.mark ip-dscp
Default 1
Format
mark-cos <0-7>
Mode Policy-Class-Map Config
Incompatibilities Drop, Mark IP DSCP, IP Precedence, Police
mark ip-dscp
This command marks all packets for the associated traffic stream with the specified IP DSCP
value.
Quality of Service (QoS) Commands
Managed Switch CLI Manual, Release 8.0.3
v1.0, July 2010
8-22