Show Interface Ethernet - NETGEAR GSM7228PS Cli Manual

Term Definition
Packets The number of inbound packets that contained errors preventing them from being
Received With
deliverable to a higher-layer protocol.
Error
Packets The total number of packets transmitted out of the interface.
Transmitted
Without Error
Broadcast The total number of packets that higher-level protocols requested to be transmitted to the
Packets
Broadcast address, including those that were discarded or not sent.
Transmitted
Transmit Packet The number of outbound packets that could not be transmitted because of errors.
Errors
Address Entries The total number of Forwarding Database Address Table entries now active on the
Currently In Use
switch, including learned and static entries.
VLAN Entries The number of VLAN entries presently occupying the VLAN table.
Currently In Use
Time Since The elapsed time, in days, hours, minutes, and seconds since the statistics for this switch
Counters Last
were last cleared.
Cleared

show interface ethernet

This command displays detailed statistics for a specific interface or for all CPU traffic based upon
the argument.
Format
show interface ethernet {<unit/slot/port> | switchport}
Mode Privileged EXEC
When you specify a value for <unit/slot/port>, the command displays the following
information.
Term Definition
Total Packets
The total number of octets of data received by the processor (excluding framing bits but
Received
including FCS octets).
(Octets)
Packets The total number of packets (including broadcast packets and multicast packets) received
Received
by the processor.
Without Error
Unicast Packets The number of subnetwork-unicast packets delivered to a higher-layer protocol.
Received
Utility Commands
Managed Switch CLI Manual, Release 8.0.3
v1.0, July 2010
9-10