Show Access-Lists - NETGEAR GSM7228PS Cli Manual

Term Definition
Rule Number The number identifier for each rule that is defined for the IP ACL.
Action The action associated with each rule. The possible values are Permit or Deny.
Match All Indicates whether this access list applies to every packet. Possible values are True or
False.
Protocol The protocol to filter for this rule.
Source IP The source IP address for this rule.
Address
Source IP Mask The source IP Mask for this rule.
Source L4 Port The source port for this rule.
Keyword
Destination IP The destination IP address for this rule.
Address
Destination IP The destination IP Mask for this rule.
Mask
Destination L4 The destination port for this rule.
Port Keyword
IP DSCP The value specified for IP DSCP.
IP Precedence The value specified IP Precedence.
IP TOS The value specified for IP TOS.
Log Displays when you enable logging for the rule.
Assign Queue The queue identifier to which packets matching this rule are assigned.
Mirror Interface The unit/slot/port to which packets matching this rule are copied.
Redirect The unit/slot/port to which packets matching this rule are forwarded.
Interface

show access-lists

This command displays IP ACLs, IPv6 ACLs, and MAC access control lists information for a
designated interface and direction.
Format
show access-lists interface <unit/slot/port> in
Mode Privileged EXEC
Term Definition
ACL Type Type of access list (IP, IPv6, or MAC).
Quality of Service (QoS) Commands
Managed Switch CLI Manual, Release 8.0.3
v1.0, July 2010
8-43