Lldp Notification-Interval; Clear Lldp Statistics - NETGEAR GSM7228PS Cli Manual

no lldp notification
Use this command to disable notifications.
Default disabled
Format
no lldp notification
Mode Interface Config

lldp notification-interval

Use this command to configure how frequently the system sends remote data change notifications.
The <interval> parameter is the number of seconds to wait between sending notifications. The
valid interval range is 5-3600 seconds.
Default 5
Format
lldp notification-interval <interval>
Mode Global Config
no lldp notification-interval
Use this command to return the notification interval to the default value.
Format
no lldp notification-interval
Mode Global Config

clear lldp statistics

Use this command to reset all LLDP statistics, including MED-related information.
Format
clear lldp statistics
Mode Privileged Exec
Switching Commands
Managed Switch CLI Manual, Release 8.0.3
v1.0, July 2010
3-174