Show Ip Igmp; Show Ip Igmp Groups - NETGEAR GSM7228PS Cli Manual

show ip igmp

This command displays the system-wide IGMP information.
Format
show ip igmp
Modes • Privileged EXEC
• User EXEC
Term Definition
IGMP Admin The administrative status of IGMP. This is a configured value.
Mode
Interface Valid unit, slot, and port number separated by forward slashes.
Interface-Mode Indicates whether IGMP is enabled or disabled on the interface. This is a configured
value.
Opeational- The current state of IGMP on this interface. Possible values are Operational or Non-
Status
Operational.

show ip igmp groups

This command displays the registered multicast groups on the interface. If [detail] is specified
this command displays the registered multicast groups on the interface in detail.
Format
show ip igmp groups <unit/slot/port> [detail]
Mode Privileged EXEC
If you do not use the detail keyword, the following fields appear:
Term Definition
IP Address The IP address of the interface participating in the multicast group.
Subnet Mask The subnet mask of the interface participating in the multicast group.
Interface Mode This displays whether IGMP is enabled or disabled on this interface.
The following fields are not displayed if the interface is not enabled:
Term Definition
Querier Status This displays whether the interface has IGMP in Querier mode or Non-Querier mode.
Groups The list of multicast groups that are registered on this interface.
IP Multicast Commands
Managed Switch CLI Manual, Release 8.0.3
v1.0, July 2010
5-31