clear lldp remote-data
Use this command to delete all information from the LLDP remote data table, including MED-
related information.
Format
clear lldp remote-data
Mode
Global Config
show lldp
Use this command to display a summary of the current LLDP configuration.
Format
show lldp
Mode
Privileged Exec
Term
Definition
Transmit
How frequently the system transmits local data LLDPDUs, in seconds.
Interval
Transmit Hold
The multiplier on the transmit interval that sets the TTL in local data LLDPDUs.
Multiplier
Re-initialization
The delay before re-initialization, in seconds.
Delay
Notification
How frequently the system sends remote data change notifications, in seconds.
Interval
show lldp interface
Use this command to display a summary of the current LLDP configuration for a specific interface
or for all interfaces.
Format
show lldp interface {<unit/slot/port> | all}
Mode
Privileged Exec
Term
Definition
Interface
The interface in a unit/slot/port format.
Link
Shows whether the link is up or down.
Switching Commands
Managed Switch CLI Manual, Release 8.0.3
v1.0, July 2010
3-175