Debug Ip Pimdm Packet - NETGEAR GSM7228PS Cli Manual

Format
debug ip mcache packet [receive|transmit]
Mode Privileged EXEC
no debug ip mcache packet
Use this command to disable debug tracing of MDATA packet reception and transmission.
Format
no debug ip mcache packet [receive|transmit]
Mode Privileged EXEC

debug ip pimdm packet

Use this command to trace PIMDM packet reception and transmission. receive traces only
received PIMDM packets and transmit traces only transmitted PIMDM packets. When neither
keyword is used in the command, then all PIMDM packet traces are dumped. Vital information
such as source address, destination address, control packet type, packet length, and the interface on
which the packet is received or transmitted is displayed on the console.
Default disabled
Format
debug ip pimdm packet [receive|transmit]
Mode Privileged EXEC
no debug ip pimdm packet
Use this command to disable debug tracing of PIMDM packet reception and transmission.
Format
no debug ip pimdm packet [receive|transmit]
Mode Privileged EXEC
Utility Commands
Managed Switch CLI Manual, Release 8.0.3
v1.0, July 2010
9-70