Radius Server Retransmit; Radius Server Timeout - NETGEAR GSM7228PS Cli Manual

Field Description
ip addr The IP address of the RADIUS Authenticating server.
dnsname The DNS name of the server.

radius server retransmit

This command configures the global parameter for the RADIUS client that specifies the number of
transmissions of the messages to be made before attempting the fall back server upon unsuccessful
communication with the current RADIUS authenticating server. When the maximum number of
retries are exhausted for the RADIUS accounting server and no response is received, the client
does not communicate with any other server.
Default 4
Format
radius server retransmit <retries>
Mode Global Config
Field Description
retries The maximum number of transmission attempts in the range of 1 to 15.
no radius server retransmit
The no version of this command sets the value of this global parameter to the default value.
Format
no radius server retransmit
Mode Global Config

radius server timeout

This command configures the global parameter for the RADIUS client that specifies the timeout
value (in seconds) after which a request must be retransmitted to the RADIUS server if no
response is received. The timeout value is an integer in the range of 1 to 30.
Management Commands
Managed Switch CLI Manual, Release 8.0.3
v1.0, July 2010
10-58