Gvrp Commands; Set Gvrp Adminmode - NETGEAR GSM7228PS Cli Manual

Format
show garp
Mode • Privileged EXEC
• User EXEC
Term
GMRP Admin Mode
GVRP Admin Mode

GVRP Commands

This section describes the commands you use to configure and view GARP VLAN Registration
Protocol (GVRP) information. GVRP-enabled switches exchange VLAN configuration
information, which allows GVRP to provide dynamic VLAN creation on trunk ports and
automatic VLAN pruning.
Note: If GVRP is disabled, the system does not forward GVRP messages.

set gvrp adminmode

This command enables GVRP on the system.
Default disabled
Format
set gvrp adminmode
Mode Privileged EXEC
no set gvrp adminmode
This command disables GVRP.
Switching Commands
Definition
The administrative mode of GARP Multicast Registration Protocol (GMRP) for the
system.
The administrative mode of GARP VLAN Registration Protocol (GVRP) for the
system.
v1.0, July 2010
Managed Switch CLI Manual, Release 8.0.3
3-59