Captive Portal Interface Commands; Captive-Portal Client Deauthenticate; Show Captive-Portal Interface Configuration Status - NETGEAR GSM7228PS Cli Manual

If the CP ID is specified, the following terms are displayed.
Term Definition
Interface The description of the interace
Description
Example
(switch)#show captive-portal configuration client status
CP ID CP Name Client MAC Address
----- ------- ------------------
1 cp1 0002.BC00.1290
2 cp2 0002.BC00.1292
3 cp3 0002.BC00.1293
(switch)#show captive-portal configuration 1 client status
CP ID..................................... 1
CP Name................................... cp1
Client
MAC Address IP Address
-------------- -------------
0002.BC00.1290 10.254.96.47
0002.BC00.1291 10.254.96.48

captive-portal client deauthenticate

Use this command to deauthenticate a specific captive portal client. The
Client MAC address.
Format
captive-portal client deauthenticate macaddr
Mode Privileged EXEC mode

Captive Portal Interface Commands

The following section describes captive portal interface commands.

show captive-portal interface configuration status

Use this command to display the interface to configuration assignments for all captive portal
configurations or for a specific configuration. <1-10> is the captive portal ID.
Captive Portal Commands
Client
Interface
---------
1/0/1
1/0/2
v1.0, July 2010
Managed Switch CLI Manual, Release 8.0.3
Client IP Address
-----------------
10.254.96.47
10.254.96.49
10.254.96.50
Interface Description
----------------------
Unit:1 Slot:0 Port:1 Gigabit
Unit:1 Slot:0 Port:2 Gigabit
Interface
---------
1/0/1
1/0/3
1/0/4
macaddr is the
12-23