Default-Metric (Ospfv); Distance Ospf (Ospfv) - NETGEAR GSM7228PS Cli Manual

default-metric (OSPFv3)
This command is used to set a default for the metric of distributed routes.
Format
default-metric <1-16777214>
Mode Router OSPFv3 Config
no default-metric (OSPFv3)
This command is used to set a default for the metric of distributed routes.
Format
no default-metric
Mode Router OSPFv3 Config
distance ospf (OSPFv3)
This command sets the route preference value of OSPF route types in the router. Lower route
preference values are preferred when determining the best route. The type of OSPF route can be
intra, inter, or external. All the external type routes are given the same preference value. The range
of <preference> value is 1 to 255.
Default 110
Format
distance ospf {intra-area <1-255> | inter-area <1-255> | external <1-
255>}
Mode Router OSPFv3 Config
no distance ospf(OSPFv3)
This command sets the default route preference value of OSPF routes in the router. The type of
OSPF route can be intra, inter, or external. All the external type routes are given the same
preference value.
Format
no distance ospf {intra-area | inter-area | external}
Mode Router OSPFv3 Config
IPv6 Commands
Managed Switch CLI Manual, Release 8.0.3
v1.0, July 2010
7-48