Switching - NETGEAR GSM7228PS Cli Manual

Table 11-18: User_Manager Log Messages
Component Message
User_Manager User Login Failed for XXXX
User_Manager Access level for user XXXX could not be
determined. Setting to READ_ONLY.
User_Manager Could not migrate config file XXXX from
version YYYY to ZZZZ. Using defaults.

Switching

Table 11-19: Protected Ports Log Messages
Component Message
Protected Ports Protected Port: failed to save configuration This appears when the protected port
Protected Ports protectedPortCnfgrInitPhase1Process:
Unable to create r/w lock for protectedPort
Protected Ports protectedPortCnfgrInitPhase2Process:
Unable to register for VLAN change callback
Protected Ports Cannot add intIfNum xxx to group yyy
Protected Ports unable to set protected port group
Protected Ports Cannot delete intIfNum xxx from group yyy This appears when a dtl call to delete an
Protected Ports Cannot update group YYY after deleting
interface XXX
Protected Ports Received an interface change callback while
not ready to receive it
Log Messages
Managed Switch CLI Manual, Release 8.0.3
Cause
Failed to authenticate user login. XXXX
indicates the username to be authenticated.
Invalid access level specified for the user.
The access level is set to READ_ONLY.
XXXX indicates the username.
Failed to migrate the config file. XXXX is the
config file name. YYYY is the old version
number and ZZZZ is the new version
number.
Cause
configuration cannot be saved
This appears when
protectedPortCfgRWLock Fails
This appears when nimRegisterIntfChange
with VLAN fails
This appears when an interface could not be
added to a particular group.
This appears when a dtl call fails to add
interface mask at the driver level
interface from a group fails
This message appears when an update
group for a interface deletion fails
This appears when an interface change call
back has come before the protected port
component is ready.
v1.0, July 2010
11-10