Management Security Commands; Crypto Certificate Generate - NETGEAR GSM7228PS Cli Manual

Term Definition
Administrative This field indicates whether the administrative mode of SSH is enabled or disabled.
Mode
Protocol Level The protocol level may have the values of version 1, version 2 or both versions 1 and
version 2.
SSH Sessions The number of SSH sessions currently active.
Currently Active
Max SSH The maximum number of SSH sessions allowed.
Sessions
Allowed
SSH Timeout The SSH timeout value in minutes.
Keys Present Indicates whether the SSH RSA and DSA key files are present on the device.
Key Generation Indicates whether RSA or DSA key files generation is currently in progress.
in Progress

Management Security Commands

This section describes commands you use to generate keys and certificates, which you can do in
addition to loading them as before.

crypto certificate generate

Use this command to generate self-signed certificate for HTTPS. The generate RSA key for SSL
has a length of 1024 bits. The resulting certificate is generated with a common name equal to the
lowest IP address of the device and a duration of 365 days.
Format
crypto certificate generate
Mode Global Config
no crypto certificate generate
Use this command to delete the HTTPS certificate files from the device, regardless of whether
they are self-signed or downloaded from an outside source.
Format
no crypto certificate generate
Mode Global Config
Management Commands
Managed Switch CLI Manual, Release 8.0.3
v1.0, July 2010
10-19