Show Isdp Interface - NETGEAR GSM7228PS Cli Manual

Term Definition
Timer The frequency with which this device sends ISDP packets. This value is given in
seconds.
Hold Time The length of time the receiving device should save information sent by this device. This
value is given in seconds.
Version 2 The setting for sending ISDPv2 packets. If disabled, version 1 packets are transmitted.
Advertisements
Device ID The Device ID advertised by this device. The format of this Device ID is characterized by
the value of the Device ID Format object.
Device ID Indicates the Device ID format capability of the device.
Format
• serialNumber indicates that the device uses a serial number as the format for its
Capability
Device ID.
• macAddress indicates that the device uses a Layer 2 MAC address as the format for
its Device ID.
• other indicates that the device uses its platform-specific format as the format for its
Device ID.
Device ID Indicates the Device ID format of the device.
Format
• serialNumber indicates that the value is in the form of an ASCII string containing the
device serial number.
• macAddress indicates that the value is in the form of a Layer 2 MAC address.
• other indicates that the value is in the form of a platform specific ASCII string
containing info that identifies the device. For example, ASCII string contains
serialNumber appended/prepended with system name.

show isdp interface

This command displays ISDP settings for the specified interface.
Format
show isdp interface {all | <unit/slot/port>}
Mode Privileged EXEC
Term Definition
Mode ISDP mode enabled/disabled status for the interface(s).
Switching Commands
Managed Switch CLI Manual, Release 8.0.3
v1.0, July 2010
3-209