Packet Capture Commands - NETGEAR GSM7228PS Cli Manual

www.stanford.edu

Packet Capture Commands

Packet capture commands assist in troubleshooting protocol-related problems with the
management CPU. The packets to and from the management CPU can be captured in an internally
allocated buffer area for export to a PC host for protocol analysis. Public domain packet analysis
tools like Ethereal can be used to decode and review the packets in detail. Capturing can be
performed in a variety of modes, either transmit-side only, receive-side only, or both. The number
of packets captured will depend on the size of the captured packets.
capture transmit packet
This command enables the capturing of transmit packets.
Format
capture transmit packet
Mode Global Config
no capture transmit packet
This command disables the capturing of transmit packets.
Format
no capture transmit packet
Mode Global Config
capture receive packet
This command enables the capturing of receive packets.
Format
capture receive packet
Mode Global Config
Utility Commands
72 3
v1.0, July 2010
Managed Switch CLI Manual, Release 8.0.3
IP 171.64.14.203
9-61