Show Ipv6 Mld Traffic - NETGEAR GSM7228PS Cli Manual

Field Description
Last Member This value indicates the configured number of Group-Specific Queries sent before the
Query Count router assumes that there are no local members.
The following information is displayed if the operational mode of the MLD interface is enabled.
Field Description
Querier Status This value indicates whether the interface is an MLD querier or non-querier on the subnet
it is associated with.
Querier Address The IP address of the MLD querier on the subnet the interface is associated with.
Querier Up Time Time elapsed in seconds since the querier state has been updated.
Querier Expiry Time left in seconds before the Querier loses its title as querier.
Time
Wrong Version Indicates the number of queries received whose MLD version does not match the MLD
Queries version of the interface.
Number of Joins The number of times a group membership has been added on this interface.
Number of The number of times a group membership has been removed on this interface.
Leaves
Number of The current number of membership entries for this interface.
Groups

show ipv6 mld traffic

Use this command to display MLD statistical information for the router.
Format
show ipv6 mld traffic
Mode • Privileged EXEC
• User EXEC
Field
Valid MLD Packets Received The number of valid MLD packets received by the router.
Valid MLD Packets Sent
Queries Received
Queries Sent
IPv6 Multicast Commands
Description
The number of valid MLD packets sent by the router.
The number of valid MLD queries received by the router.
The number of valid MLD queries sent by the router.
v1.0, July 2010
Managed Switch CLI Manual, Release 8.0.3
6-22