method1 [method2...] At least one from the following table:
Keyword
local
none
radius
no aaa authentication dot1x
This command is used to remove the authentication at login.
Format
no aaa authentication dot1x default
Mode
Global Config
write memory
Use this command to save running configuration changes to NVRAM so that the changes you
make will persist across a reboot. This command is the same as copy system:running
config nvram:startup-config.
Format
write memory
Mode
Privileged EXEC
SNMP Commands
This section describes the commands you use to configure Simple Network Management Protocol
(SNMP) on the switch. You can configure the switch to act as an SNMP agent so that it can
communicate with SNMP managers on your network.
Management Commands
Description
Uses the local username database for authentication.
Uses no authentication.
Uses the list of all RADIUS servers for authentication.
v1.0, July 2010
Managed Switch CLI Manual, Release 8.0.3
10-40