Ip Pimsm Ssm; Ip Pim-Trapflags - NETGEAR GSM7228PS Cli Manual

ip pimsm ssm

Use this command to define the Source Specific Multicast (SSM) range of IP multicast addresses.
Default disabled
Format
ip pimsm ssm {default | <group-address> <group-mask>}
Mode Global Config
Parameter Description
default-range Defines the SSM range access list to 232/8.
no ip pimsm ssm
This command is used to disable the Source Specific Multicast (SSM) range.
Format
no ip pimsm ssm
Mode Global Config

ip pim-trapflags

This command enables the PIM trap mode for both Sparse Mode (SM) and Dense Mode. (DM).
Default disabled
Format
ip pim-trapflags
Mode Global Config
no ip pim-trapflags
This command sets the PIM trap mode to the default.
Format
no ip pim-trapflags
Mode Global Config
IP Multicast Commands
Managed Switch CLI Manual, Release 8.0.3
v1.0, July 2010
5-22