Provisioning (Ieee 802.1P) Commands; Vlan Port Priority All; Vlan Priority - NETGEAR GSM7228PS Cli Manual

Term
Voice VLAN Interface Mode The admin mode of the Voice VLAN on the interface.
Voice VLAN ID
Voice VLAN Priority
Voice VLAN Untagged
Voice VLAN CoS Override
Voice VLAN Status

Provisioning (IEEE 802.1p) Commands

This section describes the commands you use to configure provisioning, which allows you to
prioritize ports.

vlan port priority all

This command configures the port priority assigned for untagged packets for all ports presently
plugged into the device. The range for the priority is 0-7. Any subsequent per port configuration
will override this configuration setting.
Format
vlan port priority all <priority>
Mode Global Config

vlan priority

This command configures the default 802.1p port priority assigned for untagged packets for a
specific interface. The range for the priority is 0–7.
Default 0
Format
vlan priority <priority>
Mode Interface Config
Switching Commands
.
Definition
The Voice VLAN ID
The do1p priority for the Voice VLAN on the port.
The tagging option for the Voice VLAN traffic.
The Override option for the voice traffic arriving on the port.
The operational status of Voice VLAN on the port.
v1.0, July 2010
Managed Switch CLI Manual, Release 8.0.3
3-51