Ipv6 Nd Reachable-Time; Ipv6 Nd Suppress-Ra - NETGEAR GSM7228PS Cli Manual

Default 1800
Format
ipv6 nd ra-lifetime <lifetime>
Mode Interface Config
no ipv6 nd ra-lifetime
This command resets router lifetime to the default value.
Format
no ipv6 nd ra-lifetime
Mode Interface Config

ipv6 nd reachable-time

This command sets the router advertisement time to consider a neighbor reachable after neighbor
discovery confirmation. Reachable time is specified in milliseconds. A value of zero means the
time is unspecified by the router.
Default 0
Format
ipv6 nd reachable-time <0–3600000>
Mode Interface Config
no ipv6 nd reachable-time
This command means reachable time is unspecified for the router.
Format
no ipv6 nd reachable-time
Mode Interface Config

ipv6 nd suppress-ra

This command suppresses router advertisement transmission on an interface.
Default disabled
IPv6 Commands
Managed Switch CLI Manual, Release 8.0.3
v1.0, July 2010
7-18