Setting The Present Measurement Value To "0" Again When Using A Forced Zero - Omron K3HB-H User Manual

5.26 Setting the Present Measurement Value to "0" Again when Using a Forced Zero

5.26 Setting the Present Measurement Value to "0" Again
when Using a Forced Zero
The tare zero function shifts the present measurement value to "0" again using a forced zero.
Explanation of Functions
This function is effective when each of two different types of compound are to be weighed, as shown in the
following example.
Scale error + tare weight
Scale error
Measurement
value
UP Key
ZERO input
• Information about whether tare zero is being executed or cleared and shift values after tare zero is
executed are not stored in memory when the power is turned OFF. If the power is turned OFF during
tare zero, the Unit will be in forced-zero status when the power is turned ON again.
• When the display range has been exceeded or a sensor error occurs, tare zero cannot be executed while
no measurement is being performed. Forced-zero can be cleared, but not during RESET input.
There are two methods for executing and clearing tare zero: using key operations and using ZERO inputs.
● Using Key Operations
Executing tare zero: Press the U [UP] Key while forced-zero is being executed and the present value is
displayed to execute tare zero.
Clearing tare zero: Press and hold for 1 s to clear tare zero. (Press it again for 1 s to clear forced-zero.)
R-Z not lit.
12.3
90000
ZERO not lit.
Tare zero
Material A
Material A weight
Forced zero Tare zeroed
Forced zero status
T-ZR not lit.
U
(Execute)
0.0
90000
U
ZERO lit.
U
2 s min. (Forced zero released.)
Advanced function setting level
Material B
Weight of materials A and B
Material B weight
Tare zero
Tare zeroed
release
2 s
1 s
Tare zero status
T-ZR lit.
U
(Execute)
1 s min.
(Tare zero released.)
X V S
Scale error + tare weight
+ Weight of materials A and B
Forced
zero release
U
0.0
90000
The tare can be zeroed
again even after it has
been used.
5-67