Omron K3HB-H User Manual page 11

● Revision History
X
The revision code of this manual is given at the end of the catalog number at the
bottom left of the back cover.
Cat. No. N128-E1-01D
Revision code
01 November 2003
01A January 2004
01B March 2005
01C December 2006
01D April 2007
Date
Original production
Page 2-4: Bottom left portion of C corrected.
Page A-5: Information updated for "applicable
standards."
Page 1-4: Power interruption memory added.
Page 2-4: Added information on BCD Output
Cable at bottom of page.
Pages 2-4, A-11, and A-17: Changed K34-B4 to
K34-BCD.
Pages 2-5: Added information on Special Cable
(for Event Inputs with 8-pin Connector) at bottom
of page.
Page 2-7: "Min." changed to "max." at bottom of
page.
Page 2-12: Corrected the maximum
measurement range of input range B for DC
voltage.
Page 2-13: Changed K2HB-V to K3HB-V in
heading.
Page 5-29: Underlined the phrase in the first line
of the page to draw user's attention.
Page 5-83: Text added after table.
Page 6-9: Middle rows of table reversed.
Pages A-2: Changed "XAD" to "XVA" and "XVA"
to "XAD" in left column.
Page A-3: Changed column division within table
under Event inputs, i.e., Startup compensation
timer input was moved to the same column as for
the Hold input.
Page A-3: Changed "max." to "min." for the load
resistance specification of the linear output.
Page A-10: Added information on BCD to table 4.
Page 2-13: Corrected model number in heading.
Page 5-85: Added values for the upper and lower
limits and corrected those for the present value in
the bottom table.
Page 6-9: Corrected second and third cells in
Input column.
Page A-2: Corrected third and fourth cells in
Absolute max. ratings of inputs column.
Page A-16: Corrected capitalization in first four
cells in Characters column.
Page 6-9: Corrected second and third cells in
Input column.
Page A-2: Corrected third and fourth cells in
Absolute max. ratings of inputs column.
Pages and changes