Omron K3HB-H User Manual page 51

Section 3 Basic Application Methods
1000.0 C
800.0 C
500.0 C
200.0 C
RUN Level
Initial Setting Level (
Advanced Function Setting
f)
Level (
L
3-12
Comparative set value HH
Comparative set value H
Comparative set value L
Comparative set value LL
Output HH
Output H
Output PASS
Output L
Output LL
Parameter Characters
Comparative
set value HH
Comparative
set value H
Comparative
set value L
Comparative
set value LL
✽ Check on the status displays.
0)
The Setting Level Protect setting must be set to 0 (SET.PT=0) to
L
enable moving to the advanced function setting level.
Parameter
Input type A
Temperature
unit
Comparative
output pattern
Move to
advanced
function
setting level
Parameter
Standby
sequence
Zone Outputs
Set
value
1000. 0
✽
Control example for the following
800. 0
settings:
✽
Upper limit warning: 1,000.0 C
Heating output: 800.0 C
500. 0
✽
Cooling output: 500.0 C
Lower limit warning: 200.0 C
200. 0
✽
Characters Set value
in-ta 11-r
Set the R thermocouple
sensor range.
d-u c
Set the temperature unit
to C.
out-p zone
Zone outputs
amov -0169
Move to advanced func-
tion setting level to set the
standby sequence.
Characters Set value
stdby on
Enable the standby
sequence.
Display
High
Low
ON
OFF
Remarks
Remarks
Remarks