Omron K3HB-H User Manual page 96

Parameter Setting Procedure
A Press the L [LEVEL] Key for at least
3 s in RUN level to move to the initial
setting level.
0" is displayed on the level/bank
• "
L
display to indicate the initial setting
level.
B Press the L [LEVEL] Key again (less
than 1 s) to move to the input
adjustment level and display "tmg-h."
1" is displayed on the level/bank
• "
L
display to indicate the input
adjustment level.
C Press the S [SHIFT] Key to make the
SV display flash.
• The setting can be changed when the
SV display starts to flash.
D Use the U [UP] Key to change the set
value.
E Press the M [MODE] Key to switch to
the next parameter.
• The set value is registered.
F Press the L [LEVEL] Key for at least
1 s to return to RUN level.
Remarks
Adjusting timing inputs
5.5 Setting Measurement Operations
L
3 s min.
L
1 s max.
S
U
M
* The display may
differ.
L
1 s min.
P.5-33
0
L
0."
Displays "
L
tmg-h
1
L
nomal
1."
Displays "
L
tmg-h
1
L
nomal
tmg-h
1
L
s-h
on-t
1
L
0
-----
123. 4
5-23