Knowledge Required For Setting Parameters - Omron K3HB-H User Manual

Section 5 Functions and Operations

Knowledge Required for Setting Parameters

■ About Levels
Important
Depending on the level,
measurements may continue
to be executed or stop.
Check the measurement
operation.
5-2
Levels are groups of parameters.
Levels for the K3HB are classified as follows:
Level
Makes settings to prevent
inadvertent key operations.
Movement between levels and
Protect
changes to settings may be
prohibited, depending on the protect
settings.
The normal operation mode where
inputs are read and comparative
judgements are made.
In RUN level, the present value can
be displayed, comparative set values
RUN
checked, and forced-zero executed
or cleared.
The K3HB is in RUN mode
immediately after the power is
turned ON.
Switches banks and makes settings,
Adjustment such as communications write
settings.
Makes initial settings, such as the
Initial setting input type, scaling, and comparative
output patterns.
Input Adjusts inputs.
adjustment
Enables/disables comparative set
Display value displays, and sets the display
adjustment refresh periods, display color, and
position meter.
Comparative set Makes comparative set value bank
value settings.
Linear output Sets the linear output.
Communications Sets the baud rate, data length, and
setting other communications settings.
Sets test measurement values to
Output test
perform output tests.
Advanced Used for advanced customization.
function
settings
Measurement
Function
operations
Executed
Stopped