Omron K3HB-H User Manual page 103

Section 5 Functions and Operations
Remarks
5-30
B Press the M [MODE] Key several times
to change the PV display to "amov."
• This parameter is not displayed for
the initial status due to setting level
protect.
Refer to "Limiting Key Operations"
(P.5-102) for information on removing
setting level protect.
C Press the S [SHIFT] Key to make the
SV display flash.
• The setting can be changed when the
SV display starts to flash.
D Use the U [UP] and S [SHIFT] Keys
to set the password "-0169." Press the
M [MODE] Key to move to the
advanced function setting level.
f" is displayed on the level/bank
• "
L
display to indicate the advanced
function setting level.
E Press the M [MODE] Key several times
to switch the PV display to "s.err."
F Press the S [SHIFT] Key to make the
SV display flash.
• The setting can be changed when the
SV display starts to flash.
G Use the U [UP] Key to change the SV
display to "off."
H Press the M [MODE] Key to switch to
the next parameter.
• The set value is registered.
I Press the L [LEVEL] Key for at least
1 s to return to the initial setting level.
J Press the L [LEVEL] Key for at least
1 s to return to RUN level.
Setting input types P.5-11
M
amov
0
L
0
S
amov
0
L
00000
U S
init
f
L
off
f."
Displays "
M
L
M
s. err
f
L
s.err
S
s. err
f
L
s.err
U
s. err
f
L
off
M
cmov
f
L
0
L
0
L
1 s min.
L
123. 4
123. 4
1 s min.