Omron K3HB-H User Manual page 94

Important*
Measurement
range lower limit
Measurement value
RESET
TIMING
The PV display will show "-----" in no measurement status.
Remarks
Bottom Hold
• The minimum value is held while measurement is being
performed (while the TIMING input is ON) and when the
measurement has been completed (when the TIMING input turns
OFF) the measurement value is refreshed using the held
minimum value.
• When the measurement value exceeds the measurement range
during measurement, a sensor error will occur, a sensor error will
immediately show on the display, and all outputs will turn OFF.
Also, the measurement at that time will be invalid.
• Measurements are not performed during RESET input and
TIMING inputs are disabled.
A sensor error occurs and all outputs are turned OFF
if the measurement range is exceeded.
Measurement
Power ON
period
No measurement Bottom value 1
Selecting operations for input errors
Operation will continue if input error enable is set to OFF (disabled) or
OVER (overflow).
5.5 Setting Measurement Operations
Measurements during
Measurement invalid because a sensor
reset input are invalid.
error occurred during measurement.
Input error No measurement
P.5-29
5-21