Displaying/Not Displaying Comparative Set Values - Omron K3HB-H User Manual

Section 5 Functions and Operations
5.32 Displaying/Not Displaying Comparative Set
Values
2
sv. dsp
L
(SV.DSP)
5-82
Comparative set values can be displayed or not displayed on the SV
display during operation.
This is set using the following parameter.
Parameter
Comparative set value
display
sv.dsp
If "comparative set value display" is set to OFF, the comparative set
value display will turn OFF (not be lit) after 10 s in RUN level. The
comparative set value is displayed again when any key is pressed.
Parameter Setting Procedure
A Press the L [LEVEL] Key for at least
3 s in RUN level to move to the initial
setting level.
0" is displayed on the level/bank
• "
L
display to indicate the initial setting
level.
B Press the L [LEVEL] Key several
times to move to the display adjustment
level.
2" is displayed on the level/bank
• "
L
display to indicate the display
adjustment level.
C Press the S [SHIFT] Key to make the
SV display flash.
• The setting can be changed when the
SV display starts to flash.
D Use the U [UP] Key to change the set
value.
E Press the M [MODE] Key to switch to
the next parameter.
• The set value is registered.
F Press the L [LEVEL] Key for at least
1 s to return to RUN level.
Display adjustment level
Set value Meaning of set value
off
Comparative set value not
displayed.
on
Comparative set value
displayed.
L
3 s min.
L
S
U
M
L
1 s min.
X V S H
0
L
0."
Displays "
L
sv. dsp
2
L
off
2."
Displays "
L
sv. dsp
2
L
off
sv. dsp
2
L
on
d. ref
2
L
off
123. 4
123. 4