Omron K3HB-H User Manual page 107

Section 5 Functions and Operations
Explanation of Functions
The following example shows K3HB-S settings for an ON timing delay of 20 ms and an OFF timing delay
of 10 ms.
● Timing Hold Set Value Set to Sampling Hold
Power ON
Measurement
value
RESET
TIMING
● Timing Hold Set Value Set to Peak Hold
Power ON
Measurement
value
RESET
TIMING
5-34
ON timing delay, OFF timing delay
Measurement
No measurement
value 1
20 ms 20 ms
Timing delay time
Delay processing invalid due to reset input.
Delay processing invalid
due to reset input.
No measurement Peak value 1
20 ms 20 ms
10 ms
Parameter Setting Procedure
A Press the L [LEVEL] Key for at least
3 s in RUN level to move to the initial
setting level.
0" is displayed on the level/bank
• "
L
display to indicate the initial setting
level.
B Press the L [LEVEL] Key again (less
than 1 s) to move to the input
adjustment level.
1" is displayed on the level/bank
• "
L
display to indicate the input
adjustment level.
C Press the S [SHIFT] Key to make the
SV display flash.
• The setting can be changed when the
SV display starts to flash.
No measurement Measurement value 2
20 ms
No measurement Peak value 2
20 ms
10 ms 10 ms
L
0
L
3 s min.
0."
Displays "
L
L
tmg-h
1
L
s-h
1 s max.
1."
Displays "
L
S
tmg-h
1
L
nomal