Table of Contents
Advertisement
● Forced-zero Protect
The following parameter limits key-operated execution and clearing
of forced-zero and tare zero.
Parameter
Zero protect
zr.pt
* Not available in the K3HB-H.
● Max./Min. Protect
The following parameter limits key operations for switching and
resetting maximum and minimum values.
Parameter
Max./Min protect
mm.pt
Parameter Setting Procedure
A Press the L [LEVEL] and M [MODE]
Keys together for at least 3 s in RUN
level to move to the protect level.
p" is displayed on the level/bank
• "
L
display to indicate protect level.
B Press the M [MODE] Key several times
to display the desired protection.
C Press the S [SHIFT] Key to make the
SV display flash.
D Use the U [UP] Key to change the SV
display.
E Press the M [MODE] Key to switch to
the next parameter.
• The set value is registered.
5.41 Limiting Key Operations
Set value
Restriction details
off
Forced-zero using key
operations and tare zero
execution/clear: Enabled
on
Forced-zero using key
operations and tare zero
execution/clear: Prohibited
Max./min.
Set value
value
switching
0
Enabled
1
Enabled
2
Prohibited
L
M
3 s min.
M
* The display shows
setting change protect
as an example.
S
U
M
Reset
Enabled
Prohibited
Prohibited
run. pt
p
L
0
p."
Displays "
L
wt. pt
p
L
off
wt. pt
p
L
off
wt. pt
p
L
on
zr. pt
p
L
off
5-103
Hide quick links:
Advertisement
Table of Contents
