Omron K3HB-H User Manual page 149

Section 5 Functions and Operations
5-76
Max./Min.
value
Held
Power supply
OFF
* Holds values even for no measurement status, an input error, or an
overflow.
* Holds values even with a software reset performed through key
operations or communications.
* The power interruption memory cannot be accessed if the startup
compensation timer is enabled when the power is turned ON.
Parameter Setting Procedure
A Press the L [LEVEL] Key for at least
3 s in RUN level to move to the initial
setting level.
0" is displayed on the level/bank
• "
L
display to indicate the initial setting level.
B Press the L [LEVEL] Key once (less
than 1 s) to move to the input adjustment
level.
1" is displayed on the level/bank display
• "
L
to indicate the input adjustment level.
C Press the M [MODE] Key several times
to change the PV display to "step."
D Press the S [SHIFT] Key to make the
SV display flash.
• The setting can be changed when the
SV display starts to flash.
E Use the U [UP] Key to change the set
value.
F Press the M [MODE] Key to switch to
the next parameter.
• The set value is registered.
G Press the L [LEVEL] Key for at least
1 s to return to RUN level.
Reset
ON
L
3 s min.
Displays "
L
1 s min.
Displays "
L
S
U
M
L
1 s min.
0
L
0."
L
tmg-h
1
L
nomal
1."
L
memo
1
L
off
memo
1
L
off
memo
1
L
on
tmg-h
1
L
nomal
123. 4
123. 4