Section 5 Functions and Operations
Remarks
5-28
F Press the S [SHIFT] Key to make the
SV display flash.
• The setting can be changed when the
SV display starts to flash.
G Use the U [UP] and S [SHIFT] Keys
to change the set value.
H Press the M [MODE] Key to switch to
the next parameter.
• The set value is registered.
I Press the L [LEVEL] Key for at least
1 s to return to the initial setting level.
J Press the L [LEVEL] Key for at least
1 s to return to RUN level.
• S-TMR processing takes priority even if the TIMING input turns
ON while the S-TMR input is ON.
Resetting measurements
S
U
S
M
L
1 s min.
L
1 s min.
P.5-26
s-tmr
f
L
00. 0
s-tmr
f
L
10. 0
s. err
f
L
s. err
0
L
123. 4
123. 4