Component Names And Functions - Omron K3HB-H User Manual

1.2 Component Names and Functions

Comparative output status
No. Name
PV display
SV display
Position meter
Comparative output
status indicators
Max/Min status
indicator
Level/bank display
Status indicators
SV display status
indicators
MAX/MIN Key
LEVEL Key
MODE Key
SHIFT Key
UP Key
Level/bank display
Max/Min status
88888
8
Status indicators
SV display status
LEVEL Key
MAX/MIN Key
Displays PVs, maximum values, minimum values, parameter names, and
error names.
Displays SVs and monitor values.
Displays the position of the PV with respect to a desired scale.
Display the status of comparative outputs.
Turns ON when the maximum value or minimum value is displayed in the
RUN level.
In RUN level, displays the bank if the bank function is ON. (Turns OFF if the
bank function is OFF.)
In other levels, displays the current level.
T-ZR: Turns ON when the tare zero function is executed. Turns OFF if it is
not executed or is cleared.
Zero: Turns ON when the forced-zero function is executed. Turns OFF if it
is not executed or is cleared. (Excluding the K3HB-H.)
Hold: Turns ON/OFF when hold input turns ON/OFF.
TG: Turns ON when the timing signal turns ON. Otherwise OFF.
T: Turns ON when parameters for which teaching can be performed are
displayed.
HH, H, L, LL: In RUN level, turn ON when the comparative set values HH,
H, L, and LL are displayed.
Used to switch the display between the PV, maximum value, and minimum
value and to reset the maximum and minimum values.
Used to switch level.
Used to switch the parameters displayed.
Used to change parameter settings.
When changing a set value, this key is used to move along the digits.
When changing a set value, this key is used to change the actual value.
When a measurement value is displayed, this key is used to execute or
clear the forced-zero function or to execute teaching.
1.2 Component Names and Functions
PV display
Position meter
88888
SV display
SHIFT Key
UP Key
MODE Key
Function
1-5