Omron K3HB-H User Manual page 21

Section 1 Outline
Display
Display value selection
The current display value can
be selected from the present
value, the maximum value,
and the minimum value.
P.5-78
X V S
Position meter
Displays the current
measurement value as a position
in relation to the scaling width on
a meter with 20 sections.
P.5-85
X V S
Decimal point display
Disables displaying numerals
the decimal point in
measurement values.
P.5-93
Other
Max/Min hold
Holds the maximum and
minimum measurement
values.
P.5-54
X V S
Cold junction
compensation
Enables or disables terminal
temperature compensation.
P.5-31
1-4
Display color selection
The PV display color can be
set to either green or red. The
present value color can be
switched according to the
status of comparative outputs.
P.5-83
H X
Scaling
Can convert the input signal to
any display value.
P.5-14
H
H
Bank selection
Eight comparative set value
banks can be selected using
the keys on the front of the
Unit or by external inputs.
Groups of comparative set
values can be set and can be
selected as groups.
P.5-93
H X
User calibration
Allows the user to calibrate the
K3HB.
P.6-1
X
H
Display refresh period
When inputs change quickly,
the display refresh period can
be delayed to reduce
flickering and make the
display easier to read.
P.5-73
V S H
Comparative set value display
The comparative set value
can be set to not display
during operation.
P.5-82
X V S
Bank copy
Any bank setting can be
copied to all banks.
P.5-98
V S H
Power interruption memory
Enables recording the
maximum and minimum
values when power is
V S H
interrupted.
P.5-75
X V S H
X V S H
X V S H
X V S H